1、频率稳定：本系列机型严格按照国际“无线电干扰委员会”(CISPR)的规定，采用国际工业波段27.12/40.68±0.5%MHZ，输出频率稳定，对外界设备的干扰极小。

2、输出电力特强：本系列机型采用最低损失同轴谐振器，品质因数极高，依电极大小及制品厚度。输出功率可简单地由特别设计之同调调谐器调节,能以最迅速时间焊接制品，大大提高生产量。

3、安全保护装置：操作中，当电流负荷超过稳定限定值时，过负荷电流继电器自动切断高压，保护报荡管及整流器。

4、独特强力式机头：特别的机械构造设计，能使压力均匀，上落平稳，轻重可任意调节，使制品焊接效果一致,大大提高产品质量。

5、高灵敏度火花防止器：本系列机型装有标准/高灵敏度火花抑制电路，能准确检出产生火花之不平衡电流,故在产生火花瞬间，能自动切断高频电流，使模具、材料及产品之损害降到最低程度。

6、可加装压、油压、增压、电热装置：为了特殊加工需要及省电化,本系列机型可同时加装电热装置使用;为了省力化及制品压力均一性.JGP-T机型也可加装气压、油压、增压、电热装置使用。

7、可加装程控装置：用微电脑程序集成电路装置，不打火、不烧LU型高频开关、不抢电等优点，大大降低了模具、LU型高频开关、绝缘材料的费用,同时还延长了高频机的使用寿命。

1.Frequency stability:The series of machines have stable output frequency.adopt international band(27.12/40.68±0.5%MHZ) according to CISRP code,so only tiny interference to external devices.

2.Superstrong Output Power:The series of machines adopt the minimum loss coaxial resonator,so it has high quality factor the power can be simply adjusted by special tuner, with very quick welding it greatly improves the production capacity.

3.Safety protection device:When the current-load is over stability limit value,over-load current relay automatically cuts off the high volt to protect oscillation tube and rectifier.

4.Unique powerful-type head:It has the special mechanica-structure design,and it can make uniform pressure, goes up and down smoothly, and the welding effect is consistent and greatly improves the quality of product.

5.High sensitivity spark-prevented apparatus:With standard and high sensitive spark resistant circuit,it can accurately detect uneven current,when it produces sparks, it can automatically cut off the high frequency electricity and it makes the damage of the mold, materials and products to a minmun degree.

6.lt can work with air-operated,hydraulic, pressurization and electric-heated devices:For special process and electricity saving, the machins can work with electric-heated device; in order to save manual work and keep consistency of products pressure,JGP-T machines can work with air-operated,hydraulic, pressurization and electric-heated devices.

7.It can work with PLC device:it adopts the device of microcomputer program in tegrated circuit,No striking a light,no burning LU type HF switch,no electricity snatching.So it greatiy reduces the cost of moulds,LU type HF switches and insulation materials,prolongs the machine lifespan.